napari labeling GUI

napari labeling GUI#

We replaced wxPython with PySide6 + as of version 2.3. Here is how to use the napari-aspects of the new GUI. It is available in napari-hub as a stand alone GUI as well as integrated into our main GUI, please see docs here.

License: BSD-3 PyPI Python Version tests codecov napari hub

A napari plugin for keypoint annotation with DeepLabCut.

Installation#

You can install the full DeepLabCut napari-based GUI via pip by running this in your conda env:

pip install 'deeplabcut[tf,gui]' or mac M1/M2 chip users: pip install 'deeplabcut[apple_mchips,gui]'

*please note this is available since v2.3

This is not needed if you ran the above installation, but you can install the stand-alone napari-deeplabcut via pip:

    pip install napari-deeplabcut

To install latest development version:

pip install git+https://github.com/DeepLabCut/napari-deeplabcut.git

Usage#

To use the full GUI, please run:

python -m deeplabcut

To use the stand-alone napari plugin, please launch napari:

napari

Then, activate the plugin in Plugins > napari-deeplabcut: Keypoint controls.

All accepted files (config.yaml, images, .h5 data files) can be loaded either by dropping them directly onto the canvas or via the File menu.

The easiest way to get started is to drop a folder (typically a folder from within a DeepLabCut’s labeled-data directory), and, if labeling from scratch, drop the corresponding config.yaml to automatically add a Points layer and populate the dropdown menus.

🎥 DEMO

Tools & shortcuts are:

  • 2 and 3, to easily switch between labeling and selection mode

  • 4, to enable pan & zoom (which is achieved using the mouse wheel or finger scrolling on the Trackpad)

  • M, to cycle through regular (sequential), quick, and cycle annotation mode (see the description here)

  • E, to enable edge coloring (by default, if using this in refinement GUI mode, points with a confidence lower than 0.6 are marked in red)

  • F, to toggle between animal and body part color scheme.

  • V, to toggle visibility of the selected layer.

  • backspace to delete a point.

  • Check the box “display text” to show the label names on the canvas.

  • To move to another folder, be sure to save (Ctrl+S), then delete the layers, and re-drag/drop the next folder.

napari_shortcuts

Save Layers#

Annotations and segmentations are saved with File > Save Selected Layer(s)... (or its shortcut Ctrl+S). Only when saving segmentation masks does a save file dialog pop up to name the destination folder; keypoint annotations are otherwise automatically saved in the corresponding folder as CollectedData_<ScorerName>.h5.

  • As a reminder, DLC will only use the H5 file; so be sure if you open already labeled images you save/overwrite the H5.

  • Note, before saving a layer, make sure the points layer is selected. If the user clicked on the image(s) layer first, does Save As, then closes the window, any labeling work during that session will be lost!

  • Modifying and then saving points in a machinelabels... layer will add to or overwrite the existing CollectedData layer and will not save to the machinelabels file.

Video frame extraction and prediction refinement#

Since v0.0.4, videos can be viewed in the GUI.

Since v0.0.5, trailing points can be visualized; e.g., helping in the identification of swaps or outlier, jittery predictions.

Loading a video (and its corresponding output h5 file) will enable the video actions at the top of the dock widget: they offer the option to manually extract video frames from the GUI, or to define cropping coordinates. Note that keypoints can be displaced and saved, as when annotating individual frames.

Workflow#

Suggested workflows, depending on the image folder contents:

  1. Labeling from scratch – the image folder does not contain CollectedData_<ScorerName>.h5 file.

    Open napari as described in Usage and open an image folder together with the DeepLabCut project’s config.yaml. The image folder creates an image layer with the images to label. Supported image formats are: jpg, jpeg, png. The config.yaml file creates a Points layer, which holds metadata (such as keypoints read from the config file) necessary for labeling. Select the Points layer in the layer list (lower left pane on the GUI) and click on the +-symbol in the layer controls menu (upper left pane) to start labeling. The current keypoint can be viewed/selected in the keypoints dropdown menu (right pane). The slider below the displayed image (or the left/right arrow keys) allows selecting the image to label.

    To save the labeling progress refer to Save Layers. Data successfully saved should be shown in the status bar, and the image folder should now contain a CollectedData_<ScorerName>.h5 file. (Note: For convenience, a CSV file with the same name is also saved.)

  2. Resuming labeling – the image folder contains a CollectedData_<ScorerName>.h5 file.

    Open napari and open an image folder (which needs to contain a CollectedData_<ScorerName>.h5 file). In this case, it is not necessary to open the DLC project’s config.yaml file, as all necessary metadata is read from the h5 data file.

    Saving works as described in 1.

    Note that if a new body part has been added to the config.yaml file after having started to label, loading the config in the GUI is necessary to update the dropdown menus and other metadata.

    As viridis is napari-deeplabcut default colormap, selecting the colormap in the GUI or loading the config in the GUI can be used to update the color scheme.

  3. Refining labels – the image folder contains a machinelabels-iter<#>.h5 file.

    The process is analog to 2. Open napari and open an image folder. If the video was originally labeled, and had outliers extracted it will contain a CollectedData_<ScorerName>.h5 file and a machinelabels-iter<#>.h5 file. In this case, select the machinelabels layer in the GUI, and type e to show edges. Red indicates likelihood < 0.6. As you navigate through frames, images with labels with edges will need to be refined (moved, deleted, etc). Images with labels without edges will be on the CollectedData (previous manual annotations) layer and shouldn’t need refining. However, you can switch to that layer and fix errors. You can also right-click on the CollectedData layer and select toggle visibility to hide that layer. Select the machinelabels layer before saving which will append your refined annotations to CollectedData.

    If the folder only had outliers extracted and wasn’t originally labeled, it will not have a CollectedData layer. Work with the machinelabels layer selected to refine annotation positions, then save.

    In this case, it is not necessary to open the DLC project’s config.yaml file, as all necessary metadata is read from the h5 data file.

    Saving works as described in 1.

  4. Drawing segmentation masks

    Drop an image folder as in 1, manually add a shapes layer. Then select the rectangle in the layer controls (top left pane), and start drawing rectangles over the images. Masks and rectangle vertices are saved as described in Save Layers. Note that masks can be reloaded and edited at a later stage by dropping the vertices.csv file onto the canvas.

Workflow flowchart#

        graph TD
  id1[What stage of labeling?]
  id2[deeplabcut.label_frames]
  id3[deeplabcut.refine_labels]
  id4[Add labels to, or modify in, \n `CollectedData...` layer and save that layer]
  id5[Modify labels in `machinelabels` layer and save \n which will create a `CollectedData...` file]
  id6[Have you refined some labels from the most recent iteration and saved already?]
  id7["All extracted frames are already saved in `CollectedData...`.
1. Hide or trash all `machinelabels` layers.
2. Then modify in and save `CollectedData`"]
  id8["
1. hide or trash all `machinelabels` layers except for the most recent.
2. Select most recent `machinelabels` and hit `e` to show edges.
3. Modify only in `machinelabels` and skip frames with labels without edges shown.
4. Save `machinelabels` layer, which will add data to `CollectedData`.
	- If you need to revisit this video later, ignore `machinelabels` and work only in `CollectedData`"]

  id1 -->|I need to manually label new frames \n or fix my labels|id2
  id1 ---->|I need to refine outlier frames \nfrom analyzed videos|id3
  id2 -->id4
  id3 -->|I only have a `machinelabels...` file|id5
  id3 ---->|I have both `machinelabels` and `CollectedData` files|id6
  id6 -->|yes|id7
  id6 ---->|no, I just extracted outliers|id8

Labeling multiple image folders#

Labeling multiple image folders has to be done in sequence; i.e., only one image folder can be opened at a time. After labeling the images of a particular folder is done and the associated Points layer has been saved, all layers should be removed from the layers list (lower left pane on the GUI) by selecting them and clicking on the trashcan icon. Now, another image folder can be labeled, following the process described in 1, 2, or 3, depending on the particular image folder.

Defining cropping coordinates#

Prior to defining cropping coordinates, two elements should be loaded in the GUI: a video and the DLC project’s config.yaml file (into which the crop dimensions will be stored). Then it suffices to add a Shapes layer, draw a rectangle in it with the desired area, and hit the button Store crop coordinates; coordinates are automatically written to the configuration file.

Contributing#

Contributions are very welcome. Tests can be run with tox, please ensure the coverage at least stays the same before you submit a pull request.

To locally install the code, please git clone the repo and then run pip install -e .

Issues#

If you encounter any problems, please file an issue along with a detailed description.

Acknowledgements#

This napari plugin was generated with Cookiecutter using @napari’s cookiecutter-napari-plugin template. We thank the Chan Zuckerberg Initiative (CZI) for funding this work!